 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Series DC60 3-7Amp * 60 Vdc * DC Output * Cost Effective * Industry Standard Package * AC or DC Control * Panel M ount Bipolar transistor outputs are available in 3, 5 and 7 amp ratings. Cost-effective relays offer 4000 Volt isolation and come in Crydom's standard panelmount package. Manufactured in Crydom's ISO 9001 Certified facility for optimum product performance and reliability. MODEL NUMBERS DC60S3 DC CONTROL DC60S5 DC60S7 DC60SA3 AC CONTROL DC60SA5 DC60SA7 OUTPUT SPECIFICATIONS Operating Voltage Range [Vdc] Load Current Range [Adc] Max. Surge Current, (1 sec) [Adc] Max. On-State Voltage Drop @ Rated Current [Vdc] Thermal Resistance Junction to Case (RJC ) [uC/W] Max. Off-State Leakage Current @ Rated Voltage [mA] Max. Turn-On Time [msec] Max. Turn-Off Time [msec] 3-60 .02-3 6 1.3 2.2 0.1 0.1 0.3 3-60 .02-5 10 1.5 2.2 0.1 0.1 0.3 3-60 .02-7 14 1.7 2.2 0.1 0.1 0.3 3-60 .02-3 6 1.3 2.2 0.1 10 40 3-60 .02-5 10 1.5 2.2 0.1 10 40 3-60 .02-7 14 1.7 2.2 0.1 10 40 INPUT SPECIFICATIONS Control Voltage Range Max. Turn-On Voltage Min. Turn-Off Voltage Nominal Input Impedence Typical Input Current DC CONTROL 3.5-32 Vdc 3.5 Vdc 1.0 Vdc 1500 Ohms 2.2mA @ 5 Vdc AC CONTROL 90-280 Vrms 90 Vrms 10 Vrms 60K Ohms 2mA @ 120 Vrms, 4mA @ 240 Vrms (c)2002 CRYDOM CORP, Specifications subject to change without notice. GENERAL NOTES All parameters at 25C unless otherwise specified. Heat sinking required, for derating curves see page 2. FastFax Document No. 163 SERIES DC60. Rev. 021202 PAGE 1 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Series DC60 3-7Amp * 60 Vdc * DC Output GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz (input/output/base) Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range M ECHANICAL SPECIFICATIONS Weight: (typical) 4000 Vrms 109 Ohm 8 pF -30 to 80C -30 to 125C 3.0 oz. (86.5g) Encapsulation: Terminals: Input and output polarity must be observed. Inductive loads must be diode suppressed. Thermally Conductive Epoxy Screws and Saddle Clamps Furnished, Unmounted 1.10 (27.9) .45 (11.4) MOUNTING HOLE/SLOT 0.17 (4.3) DIA. 8-32 TERMINAL (2 PLACES ) 4 AC CONTROL M ODELS PIN 3: AC CONTROL PIN 4: AC CONTROL DC CONTROL M ODELS PIN 3 : + DC CONTROL PIN 4: -- DC CONTROL 1 (+) LOAD OUTPUT All dimensions are in inches (millimeters) + OUTPUT SSR -2 3 (+) () 1.87 (47.5) 1 SOLID-STATE RELAY 3 2 (-) -- 4 2.30 (58.4) 1.70 (43.2) INPUT INPUT + Screw Torque Requirements: 6-32 Screws - 10 in. lbs., 8-32 and 10-32 Screws - 20in. lbs. (Screws dry without grease.) Transient Protection All loads are inductive, even ones that are not so labeled. An inductive load will produce harmful transient voltages when it is turned off. Diodes should be fast recovery type with PIV rated greater than supply voltage. 1.00 (25.4) 1.80 (45.7) 6-32 TERMINAL (2 PLACES) .78 (19.8) .90 (22.9) 3A 12 CURRENT DERATING CURVES 12 100 Base Plate Temp [C] 5A 2C/W 100 105 110 115 120 Base Plate Temp [C] Base Plate Temp [C] Power Dissipation 8 NO HEAT SINK 105 110 115 120 Power Dissipation 7.5C/W 7.5C/W 5C/W 8 NO HEAT SINK 4 4 0 1 1.5 2 2.5 3 20 40 60 80 100 Load Current [Arms] Max Ambient Temp. [C] 0 1 2 3 4 5 20 40 60 80 100 Load Current [Arms] Max Ambient Temp. [C] 7A Power Dissipation Crydom Heat Sinks offer excellent thermal management and are perfectly matched to the load current ratings of Crydom panel mount relays. Request Crydom's Heat Sink specification sheet for all the details. 12 2C/W 7.5C/W 5C/W 100 105 110 115 120 8 NO HEAT SINK 4 0 1 2 3 4 5 6 7 20 40 60 80 100 Load Current [Arms] Max Ambient Temp. [C] (c)2002 CRYDOM CORP, Specifications subject to change without notice. For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 FastFax Document No. 163 SERIES DC60. Rev. 021202 PAGE 2 OF 2 |
Price & Availability of DC60S3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |